PG6 Series

方型光电传感器


  • Equipped with BGS function, not easily affected by the color, shape, and surface structure of the workpiece, stable detection;
    IP67 protection level, sturdy and durable;
    Clear and visible dual color indicator light, allowing users to clearly identify the detection status from multiple angles;
    Adjusting the sensitivity through a knob can improve the accuracy of detection at different distances and materials.
  • Product advantages
  • Parameter specifications
  • Product size
  • Wiring diagram
Product Features
has BGS function, stable detection
01
IP67 Protection level, sturdy and durable
02
High sensitivity dual color LED indicator light
03
Superior anti-interference ability
04

has BGS function, stable detection

is within the specified detection range, and is not easily affected by the color, morphology, and surface structure of the workpiece. It can stably detect black, white, low reflectivity, and high reflectivity workpieces.


IP67 Protection level, sturdy and durable

PG6 Each model of the series is equipped with an IP67 protection level, which is sturdy and durable, ensuring the stability and service life of the equipment even under harsh working conditions.


High sensitivity dual color LED indicator light

PG6 All models in the series are equipped with clear and visible dual color indicator lights, allowing users to clearly identify the detection status from multiple angles.


Equipped with a mechanical knob

, the sensitivity can be adjusted through the knob, which can improve the accuracy of detection at different distances and materials.

Excellent anti-interference ability

PG6 The series adopts a unique chip and external anti-interference light algorithm, which can effectively suppress environmental light interference and sensor mutual interference.



 
类型
BGS漫反射
BGS线性光漫反射 对射 镜面反射
 型号
 NPN输出
 PG6-D100
 PG6-D300
 PG6-D500
 PG6-D900 PG6-D125 PG6-T15M PG6-M6M
 PNP输出
 PG6-D100P
 PG6-D300P
 PG6-D500P
 PG6-D900P PG6-D125P PG6-T15MP PG6-M6MP
 检测距离
 5~100mm
 5~300mm
 5~500mm
 5~900mm 5~125mm  15m 6m
 距离设定范围
 15~100mm
 30~300mm
 50~500mm
 150~900mm 10~125mm 10mm~6m
 应差
 动作距离2%以下
 动作距离5%以下 动作距离2%以下
 重复精度
 1mm以下
 电源电压
12V ~24V DC ±10% 脉动 P-P 10%以下
 消耗电流
 20mA以下
发射端:25mA以下
接收端:10mA以下
25mA以下
 输出
 控制输出
 NPN开路集电极晶体管                                                            PNP开路集电极晶体管
· 最大流入电流: 100mA                                                         · 最大流入电流: 100mA
· 外加电压: 30V DC以下( 输出和0V之间 )                             · 外加电压: 30V DC以下( 输出和+V之间 )
· 剩余电压: 2V以下( 流入电流100mA )                                  · 剩余电压: 2V以下( 流入电流100mA )
                       1V以下( 流入电流16mA )                                                     1V以下( 流入电流16mA )
 输出动作
NC(常闭) / NO(常开)
 保护电路
 短路保护、电源反极性保护、过载保护
 反应时间
1ms以下
 工作状态指示灯
 橙色LED ( 输出ON时亮起 )
 电源指示灯
 绿色LED ( 通电时亮起 )
 灵敏度调节器
配备机械式调节器
配备机械式调节器
 耐环
 境性




 
 防护等级
 IP67 ( IEC )
 使用环境温度
-25℃~ +55℃(注意不可结露、结冰)、存储时:-30℃~+70℃
 使用环境湿度
 35%RH~85%RH、存储时:35%RH~85%RH
 耐环境光
 白炽灯:受光面照明度 3000lx 以下
 耐电压
  AC1000V 1分钟 所有电源连接端子与外壳之间
 耐电阻
 所有电源连接端子与外壳之间, 20MΩ以上,基于DC 250V的高阻表
 耐振动
 频率10Hz~500Hz,双振幅1.5mm ( MAX.10G ),X、Y、Z各方向2小时
 耐冲击
 加速度500m/s² ( 约50g ),X、Y、Z方向各3次
 材质
 外壳:PC+ABS,透镜:PMMA
 电缆
 4芯( 对射型发射端:2芯 ),长度2m